Press Tool Operation
TYPES OF CUTTING OPERATION |
1 |
||
---|---|---|---|
2 |
|||
3 |
|||
4 |
|||
5 |
|||
6 |
|||
7 |
|||
8 |
|||
9 |
|||
10 |
|||
11 |
|||
12 |
In this holes are cut on the sheet metal blank is scrap.
In this Cutting action must be about a complete or enclosed contour. Blank is used part.
This is an operation for removing a piece of scrap from the edge.
In this operation three side cutting and one side bending operation.
Cut the material between two components to separate it from parent metal.
In this operation the cutting action must be along a line.
This is operation for cutting operation to control the strip movement.
In this operation maximum number of holes are pierced in single stroke.
This is operation for cut out the sheet to size with help of punching.
In this Three side forming and one side cutting operation.
This operation for to cut excess material which is left out on the flange of the drawn component.
This operation give finish cut to the blanks and pierced holes.
TYPES OF NON-CUTTING OPERATION |
1 |
||
---|---|---|---|
2 |
|||
3 |
|||
4 |
|||
5 |
|||
6 |
|||
7 |
|||
8 |
In this operation bend the sheet at specified angle.
It is process of changing flat, precut metal blank into hollow vessel.
This operation created shallow forming at equal thickness.
This is operation of making impression and depression on sheet metal.
It expands the cups along a narrow band and at the same time reduces the height.
This is operation for join the two sheets.
This is the operation of pushing the material inside/outside all around the periphery.
This is the operation of turn the edge inside.